Package 4 - Cordless Bed & Chair Alarm System (Alarm Away from Patient)

Package includes:

A cordless/wireless alarm, and both a long term bed sensor pad and chair sensor pad.

The alarm can be kept with the caregiver up to 100 ft. from the bed and chair pad, allowing the caregiver more mobility, while providing the patient with a more peaceful environment. The caregiver will receive an alert, day or night, whenever their patient is trying to get out of their bed or chair.

Features:
Alarm features volume control (varies between 70-80 decibels), an on/off switch, and a low battery indicator.
Sensor pads are made of soft cushioned vinyl, are incontinence resistant, and are easy to wipe clean (see care instructions on pad).

Choose the package that's right for your needs from the Product Options above:

Choose your bed pad size (chair pad is one size only, 10" x 15"):
10" x 30" pad - for a patient weighing 120 lbs. or more, being used on a firm mattress*.
or
20" x 30" pad (+$10) - for a patient weighing less than 120 lbs. Also recommended for any weight patient when using with a hospital bed, memory foam, gel, air orTempur-Pedic® mattress*.

Choose to add an AC adapter:
Power alarm with three (3) C batteries (not included).
or
Add the optional AC Adapter (+$9.95). If adding to your package, we recommend keeping batteries in the alarm as a backup in case of an electrical power failure.

Choose to add a Remote Reset Button:
Silence the alarm using its On/Off switch, making sure to remember to turn it back on after your patient has been attended.
or
Add a Remote Reset Button (+$26.95), which allows you to silence the alarm from up to 100 ft. away, saving valuable response time. Alarm power remains on, ready for next use.

How to use:
Place the bed pad under the fitted sheet in the bed, under the patient's upper back area, so that when they start to get up, the alarm will sound with the caregiver. When the patient sits up, the alarm will start to chime. If the patient lays back onto the pad while the alert is chiming, the system will reset itself.

Place the chair pad in seat area of chair*. When the patient removes their weight from the pad, it signals the alarm. The alarm will then sound. If the patient sits back onto the chair pad while the alert is chiming, the system will reset itself.

Other system benefits:
This cordless system also has the benefit of allowing you to add additional products to your system at any time. Call buttons, motion sensors, cordless chair pads, and floor mats are also available, (see Wireless/Cordless Systems or the Related Products at the bottom of the page). All these items will alert the same alarm. Up to six (6) can be used with one alarm!

If a cordless bed and chair alarm system with a range greater than 100' is required, see our Package 8 - Cordless/Wireless Bed & Chair Alarm System with Pager.

*Note on using with Hospital Bed, Memory Foam, Gel, Air or Tempur-Pedic Mattresses/Cushions:
Using this system with certain types of mattresses or cushions, such as hospital bed, memory foam, Tempur-Pedic®, air pressure alternating, gel cushions, or other types designed to distribute pressure away from the body, can cause false alarm responses or delayed alarm issues. Our 20" x 30" bed sensor pads are more effective when used with these types of mattresses, so we recommend purchasing the larger pad, regardless of patient weight. If experiencing issues with a chair sensor pad being used with a cushion, we recommend removing the cushion.

Warranty:
System carries a one year manufacturer warranty. Long term pads are expected to last that full year, and are recommended to be replaced after that time. To order a new pad, see our Replacement Cordless Sensor Pads.

Manufactured by Smart Caregiver Corporation.

bed alarms