You have no items in your shopping cart.
***Due to current pandemic, part of the system, the 433-PRB (Smart Caregiver pager, will be on backorder until mid to end of June 2022. We apologize for the delay and inconvenience inconvenience this may have caused you.***
One each of our high-quality, long term cordless bed and chair sensor pads, (sealed for incontinence resistance), one desktop unit called a central monitor, one caregiver pager with protective pager cover and an AC adapter to use with the central monitor.
How it works:
This cordless/wireless bed and chair alarm system with pager allows you to take alarm noise away from the patient, sending it out of the room to a desktop monitor and to a caregiver pager. The monitor can be up to 300' from the pads, and which in turn sends the alert an additional 150' to the caregiver pager which will sound an alert or vibrate, (your option), when the patient is getting out of bed.
Select the package that's right for your needs from the Product Options above:
Choose your bed pad size:
10" x 30" pad - for a patient weighing 120 lbs. or more, being used on a firm mattress*.
20" x 30" pad (+$10) - for a patient weighing less than 120 lbs. Also recommended for any weight patient when using with a hospital bed, memory foam, gel, air or Tempur-Pedic¬Æ mattress*.
Chair pad measures 10" x 15".
The central monitoring unit features tone options, and volume adjustment, (can be silenced if desired), and a low battery indicator.
Pager features adjustable volume, (varying between 70-80 decibels), language/tone options, a silent vibration mode, an LCD screen which lights up when the alert is received, and a belt clip which can double as a built-in stand.
How to use:
Place the bed pad under the fitted sheet in the bed, under the patient's upper back area. Place the chair pad toward the back of the seat of the chair. When the patient starts to get up, the pads will send a signal to the desktop unit, which will then signal the pager. Silence the alarm system by pressing the "Reset" button on the front of the desktop unit. To operate, simply connect the included AC adapter to the desktop unit. We also recommend placing four C batteries, (not included), inside the back of the desktop unit, as a backup in case of a power outage. Place two AA batteries inside the pager, (not included). The system will also reset itself if the patient sits back down on the same pad they were just using. An optional Remote Reset Button can be purchased (+26.95), if it is more convenient for the caregiver to reset/silence the system from afar, without having to return to the desktop unit after assisting the patient.
*Note on using with Hospital Bed, Memory Foam, Gel, Air or Tempur-Pedic Mattresses/Cushions:
Using this system with certain types of mattresses or cushions, such as memory foam, Tempur-Pedic, air pressure alternating, gel cushions, or other ones designed to distribute pressure away from the body, can cause false alarm responses. When sensor pads are used on these surfaces, the mattresses/cushions distribute body pressure away from the pads, which can cause the pad to think that the patient is no longer upon it, triggering an alarm. Conversely, these mattresses/cushions can also cause delayed alarm issues. Our 20" x 30" sensor pads are more effective when used with these types of mattresses, so we recommend purchasing the larger pad, regardless of patient weight.
One year manufacturer warranty on the bed pad, chair pad, and desktop unit. 6 month warranty on the pager.
Long term pads are expected to last a year and are warrantied as such. The pads should be replaced after that time. To order a new pad, see our Replacement Cordless Sensor Pads.
Watch the video below to see all the ways that the desktop central monitor in this package can help a caregiver! (Additional items shown in the video, such as motion sensors, floor mats, call buttons, etc, are available from the Related Products section at the bottom of this page.)